Atmos Power offer wide range of products like Air Dryer, Compressed Air Dryer, Industrial Air Dryer, Desiccant Dryer, Air Dryer For Air Compressor
Ambient air usually contains a significant amount of moisture (water vapor). Most modern equipment operating on compressed air require this moisture to be removed in order to reduce system downtime due to rust, pipeline blockages and freezing problems. Moisture can be economically removed with the help of an Air Dryer. In addition, an air dryer assists in reducing the dew point of the compressed air, which prevents the water vapor from condensing in the air lines.
There are usually two versions of a regenerative desiccant dryer – single tower and twin tower. AtmosPower offers a twin tower dryer in which one tower dries the moist air coming in, while the other tower is regenerating under vacuum. AtmosPower’s dryers are systematically designed to operate on present cycle times to offer ease of use to the end user with the help of a simple start/stop button. In order to ensure the highest quality of equipment, Atmospower has an in-house vacuum system manufacturing division.
A Heat of compression dryer is basically a regenerative desiccant based air dryer, which uses the heat generated during compression as its energy source for regenerating the saturated desiccant. It is a very reliable source of consistent large scale industrial dry air. The desiccant, is a highly porous material which adsorbs water molecules from the surrounding air. Some of the dry air is diverted to regenerate the media in the second tower
A HOC dryer is preferred because of its low electrical installation cost along with low power costs. The pressure drop of the system is very low, which also helps reduce its energy requirement. The dryer also uses recovered heat from the compressor to save on energy costs.
A heatless dryer works on the same principal as a standard desiccant based dryer, however no internal or external heaters are used. Instead of heating the air to dry the desiccant, more amount of air is purged into the tower. AtmosPower’s heatless dryers can achieve dew points of -40°F down to -100°F