Tag Archives: compressed air dryer

Air Dryer, Compressed Air Dryer

Atmos Power offer wide range of products like Air Dryer, Compressed Air Dryer, Industrial Air Dryer, Desiccant Dryer, Air Dryer For Air CompressorBacklinks Image For Post

Ambient air usually contains a significant amount of moisture (water vapor). Most modern equipment operating on compressed air require this moisture to be removed in order to reduce system downtime due to rust, pipeline blockages and freezing problems. Moisture can be economically removed with the help of an Air Dryer. In addition, an air dryer assists in reducing the dew point of the compressed air, which prevents the water vapor from condensing in the air lines.

There are usually two versions of a regenerative desiccant dryer – single tower and twin tower. AtmosPower offers a twin tower dryer in which one tower dries the moist air coming in, while the other tower is regenerating under vacuum. AtmosPower’s dryers are systematically designed to operate on present cycle times to offer ease of use to the end user with the help of a simple start/stop button. In order to ensure the highest quality of equipment, Atmospower has an in-house vacuum system manufacturing division.

A Heat of compression dryer is basically a regenerative desiccant based air dryer, which uses the heat generated during compression as its energy source for regenerating the saturated desiccant.  It is a very reliable source of consistent large scale industrial dry air. The desiccant, is a highly porous material which adsorbs water molecules from the surrounding air. Some of the dry air is diverted to regenerate the media in the second tower

A HOC dryer is preferred because of its low electrical installation cost along with low power costs. The pressure drop of the system is very low, which also helps reduce its energy requirement. The dryer also uses recovered heat from the compressor to save on energy costs.

A heatless dryer works on the same principal as a standard desiccant based dryer, however no internal or external heaters are used. Instead of heating the air to dry the desiccant, more amount of air is purged into the tower. AtmosPower’s heatless dryers can achieve dew points of -40°F down to -100°F

Air Dryer, Compressed Air Dryer http://www.atmospower.in/air-dryer/

Industrial Air Dryer and Biogas Bottling

Atmos Power offer wide range of products like Biogas Bottling, Industrial Air Dryer, Mpsa Oxygen Plant, Mpsa Nitrogen, Air And Gas Dryers, Oxygen Plant, Air Dryer, Nitrogen Plant, Biogas Plant India, Biogas Upgradation, Biogas Plant, Compressed Air Dryer, Air Dryer For Air Compressor, Air Compressor Dryer System, Air Compressor With Air Dryer, Desiccant Dryer, Desiccant Air Dryer, Air Dryer System, Psa Nitrogen, Psa Nitrogen Plant, Psa Oxygen, Psa Oxygen Plant, Biogas Upgradation Plant, Biogas Upgrading Plant, Biogas Refining, Biogas Purification, Biogas Purification Plant, Biogas Cleaning, Biogas Conditioning, Biogas Bottling Plant, Biogas Compression, Compressed Biogas, Biogas Plant Cost, Biogas Power Plant at atmospower.inBacklinks Image For Post

Mr. Brij Raj Singh is a chemical Engineer with more than 20 years of experience in Processing, Designing, Engineering, Manufacturing &Comissioning of gas genration plants throughout India.

After gaining years of experience in the field of gas generation systems, Mr. Singh co-founded AtmosPower in 2010. His years of experience and technical knowledge allowed him to manufacture the most cost efficient, yet high quality plants in the market today.

He also has servicing contracts for gas generation systems in Africa and is also part of the Gujarat Chamber of Commerce.

Mr. Navroz Tarapore has been in the Engineering field for the past 25 years. He has factories for component manufacturing which specialize in Heavy Fabrication. His first company H.T.Engineering was established in 1992.

After tasting success in the engineering field, he co-founded AtmosPower, which is known as one of the top Green Energy companies in India. Not being satisfied with two companies, he recently co-founded his third company MeCaster Flow Solutions, which manufactures Safety Valves, Desuperheaters and other high precision equipment. In addition he has worked with the Indian Ministry of defence to develop detonators for Rockets & Missiles.

Industrial Air Dryer and Biogas Bottling http://www.atmospower.in/founders/